|Grade||Genuine Rolex||AAA Swiss||Swiss||Automatic|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Bezels||Bi-directional Rotating Time-Lapse||Bi-directional Rotating||Fixed||Fixed|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Engine||Rolex Calibre 2836/2813|
|Dial Color||Grey Dial|
Band Material: 316L. The band is made of 316L steel, the hardest material, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Watch Case: 316L. The material in this example comes from 316L stainless steel, which is a medium-to-high-grade shell material. Because it contains molybdenum, it is more corrosion-resistant than 304, and the grade is also higher.
Case Back: Solid. In the watch world, a sturdy back cover is very important and is usually used to protect the movement of the watch from scratches and external damage. These watch cases can also increase the durability and strength of the watch movement.
Crystal: Sapphire Crystal. We use sapphire crystal on the watch, which is a unique optical material. It is not only dazzling, but also scratch-resistant. The color rendering index (CRI) of the anti-reflective coating is 100, and the brightness is increased by up to 50%. Tips: The A Replica is applied with mineral glass instead of sapphire.
Second Markers: Minute Markers around the outer rim. The small mark on the outer edge of the glass edge is one of the most recognized design elements in all industries, as shown in the picture above, the minute mark around the outer edge.
Dial Markers: luminous dot. The luminous point is a new type of sensor that can detect time in the dark. When receiving a signal from an external source, this point will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.
Luminiscence: Hands and Markers. For the replica watch, we apply with luminiscence of hands and markers. With this watch, you will not waste time to check the real-time.
Bezel Material: Stainless Steel. The bezel, made of stainless steel bezel, has high dimensional stability, high resilience and UV resistance. It can be used in both hard and soft cases. It’s also resistant to water, heat and deliquescent substances like oil or food.
Clasp: Fold Over Clasp. This is a great way to protect and store your watch, which has a unique design that creates a secure clasp, which can be opened and closed with ease.
Water Resistance: 30 meters. Always wearing the watch even when you are in bathroom? Don’t worry, the watch’s waterproof depth is 30 meters, full enough for your daily life. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Function: Date, Hour, Minute, Second. The watch has a time measurement function, the minute hand is used to estimate the current time, and the stop is used to estimate the time based on the interval.